Plastic comes in many shapes and sizes and can be used for just about anything. Acrylic is a plastic product that is easy to work because it seems most places (but other shapes are also available). As may be clear or frosted acrylic glass, which can be built plastic cabinets. Ice panels can be used for the structure of the cabinet and shelves, while the transparent panels can be used for plastic cabinet doors.

Once you become the size of his plastic cabinet, use the tape measure around eight pieces of half-inch thick sheet of acrylic activity determined. Four of them at the level they have decided to be cut, the others will be cut four to the width of your choice. Mark where the board must be reduced.

Use the CNC saw to cut the acrylic panel into the sizes you have measured.

Use the acrylic glue (solvent welding) to glue together two of each of the eight pieces of acrylic panel. (The two pieces to be glued together should match in length and/or width). You want to end up with four matching acrylic panels.

Use the acrylic glue (solvent welding) to join the four pieces into a square.

Once the panels have dried, if you are not going to use shelves, cut a solid piece of the one-half inch thick acrylic panel to use as a “back wall”. Use the acrylic glue (solvent welding) to attach it to the four pieces.

Cut another solid piece (you might want this piece to be clear, especially if the other pieces are frosted) to be used as your door, if you are going to have a door.

If you are using shelves, decide how many shelves you put in his cabinet, then measure, so that the shelves are to be evenly distributed. Use the CNC panel carefully cut a small slot in the pieces of acrylic panels that are used for the faces of the cabinet. This will fit the spokes.

Use CNC milled acrylic glass plate the 1/4-inch necessary in size and number of tablets.

If your plastic cabinet doors, place two plastic enclosures locks that are designed to be used in acrylic panels on the side of the door panel and the corresponding side of the box.

Place a small handful of decorative door through the door in the middle.